NC6000A / 8000A Series

NC6000 Series Datasheet

Feature:

-    Output White Gaussian Noise

-    Attenuator Range 0 to 10 dB in 1dB steps

-    Inpedance 50 Ohms

-    Typical VSWR 1.5:1

Application:

-    BER Testing

-    Military Jamming

-    “K”Band Capability

-    CATV Testing

-    Video Testing

GPS7500 Noise Generator

Feature:

-    +21 dBm Output Power

-    1000 to 2000 MHz Synthesizer

-    40MHz Arbitrary Waveform

-    164.5 dB On/Off Radio

-    +/-0.5 ppm over 0 to 50℃

Application:

-    GPS Receiver Test and Jamming to:

*RTCA DO-229, DO-235, DO-253

*Galileo

*GLONASS

*Automotive Standards

*Mobile Phone Location and E911 Service

UFX7000A Noise Generator

UFX7000 Series Datasheet

Feature:

-    Output White Gaussian Noise

-    Output Power up to +30 dBm

-    127 dB Attenuation; 1 dB step size

-    Optional 0.1 dB step size

-    Units >2 GHz have Total Attenuation of 79.9 dB

-    Low Distortion Signal Path

Application:

-    E_b/N_o, C/N, SNR

-    Disk Drive Testing

-    BER Testing

-    Military Jamming

-    GPS Receiver Testing

-    CATV Testing

-    Spectrum Analyzer Calibration

-    Filter Testing

-    EMI Testing

J7000 Series Jitter Noise Generators

Feature:

-     Output White Gaussian Noise

-     Minimum 18 dB Crest Factor

-     Output Noise Power -3 dBm (+/-0.5 dBm)

-     Noise attenuation 0 to 63 dB in 0.1 dB steps for > 2GHz

-     Attenuator Resolution 0.1dB step size

-     Noise Attenuator ±0.2 dB or 0.5%

-     Signal Path Gain 0 ±1dB

-     Ultra-low Distortion Signal Path

Application:

-     Rj Random Jitter Source

-     Serial Data Testing

-     BER, Jitter Testing

-     Disk Drive Channel Testing

-     PCI Express, 10 GigE, SATA

PNG7000A Analog Noise Generator

PNG7000 Series Datasheet

Feature:

-     Output White Gaussian Noise

-     Minmum 18 dB Crest Factor

-     Output Noise Power +3dB

-     Noise Attenuator 0 to 63 dB, with 0.25dB step size

-     Noise Attenuator ±0.2dB or 0.5% Accuracy at 1-500 MHz

-     ±0.2dB or 1% at 0.5 – 1.0GHz

-     ±0.3dB or 2% at 1 - 2GHz

-     Signal Path Gain 0 ±1dB

-     Group delay Variation ±0.2 nsec/40 MHz

Application:

-     BER, Jitter Testing

-     Serial Data Testing

-     C/N Ratio Testing

-     E _E 1_R  Testing

-     Multiplexers

-     Disk Drive Channel Testing

JV9000 Adjustable Vcc Noise Generator for PSRR Analysis

JV9000 Series Datasheet

Feature :

-     VCC Noise Generator 500 Hz to 2 GHz, 0dBm

-     Deterministic Jitter Signal Generator 1kHz to 1GHz in steps (optional)

-     Customized inputs, outputs and signal levels possible

-     Manual versions and computerized versions available

Application :

-     Test VCC and GND noise interference immunity.

-     Component, RF Microwave system, Navigation Radar, Digital High Speed Interface Test